logo
Service Hotline:
+86-371 2285 2295
Hotline: +86-
371 2285 2295
W-U3000 Series multichannel ultrasonic flowmeter




 
Technical parameter

Items Performance & parameters
Transmitter Accuracy 1.0 %
Repeatability ≤0.2%
Max. flow 16m/s(full bore type、insertion type)、32m/s(clamp type)
Measurement
Period
500ms(twice/second)
Principle Transit-time measuring principle,4-bit IEEE754
Display LCD with backlight
Buttons Soft touch buttons
Input 2 way two wires PT1000 input, can measure heat
 
Output
Current signal:4~20mA, resistance 600W, accuracy 0.1%FS。
Data interface: RS-485.
Communication protocol MODBUS-RTU (Register address see Appendix)
 
Other functions
Record the accumulation of the latest 7 days,the latest 2 months
The data can be solidified into the FLASH memory inside the machine and automatically recalled when power is turned on.
Average current 50mA
Working temperature -10℃~70℃(others contact us)
Working range Lasting
 
Transducer
Clamp type DN80mm~DN6000mm
Insertion type DN80mm~DN6000mm
Full bore type DN15mm~DN1000mm
Cable SEYV75-2/4 shielded (default 5m)
Protection level IP65(others contact us)
Working pressure ≤1.6MPa(others contact us)
Pipeline  
material
Steel, stainless steel, cast iron, hard plastic, cement pipe and other densely pipes, allowing lining.
Inner diameter 15mm~6000mm
Straight pipe length up≧10D,down≧5D,distance to pump exist ≥30D.
Medium  
Types
Water, sea water, acid-alkali, food oil, steam, coal, diesel, crude oil, alcohol, beer, etc.
Turbidity ≦20000ppm,good measurement performance for sewage