Main technical parameters
Measuring range: 0.3m ～ 3m (special requirements optional)
Accuracy level: ± 0.5% FS
Output signal: DC two-wire system 4mA-20mA + digital signal (HART protocol)
Power supply voltage: 12V—36V DC
Nominal pressure: ≤16.0MPa / maximum 40MPa (optional)
Ambient temperature: -25 ℃ ～ + 55 ℃
Working temperature: -40 ～ + 250 ℃ (small heat sink)
-40 ～ + 400 ℃ (large heat sink)
Specific gravity of the medium: 0.4g ～ 2.0g / cm3 (measured liquid level) ≥ 0.2 g / cm3 (measured density)
Specific gravity difference: ≥0.2g / cm3 (measurement interface)
Wetted material: displacer: 304 stainless steel
displacer cage and flange: Q235A carbon steel or 304 stainless steel
Transmitter housing: low-copper cast aluminum alloy, resin powder coating on the surface
Flange specifications::
| DN Size |
Pressure（MPa） |
Flange type |
Flange standard |
Side mounted connection flange DN20-DN50
Top mounted connection flange DN65-DN150 |
PN0.6～PN2.5 |
（RF） |
DIN,JIS,ASTM,etc. |
| PN4.0～PN10.0 |
（FM） |
DIN,JIS,ASTM,etc. |
| PN16.0 |
DIN,JIS,ASTM,etc. |
| Jacketed heating trace flange DN15 |
PN2.5 |
（RF） |
DIN,JIS,ASTM,etc. |
| Can also be manufactured according to user-supplied specifications and standards |
Maximum load resistance: 600Ω (24V d.c)
Display mode: -1.9.9.9.9.9. To 9.9.9.9.9. Physical quantity (LCD)
Outlet: M20х1.5 female thread) or 1 / 2NPT (optional)
Protection level: IP65
Explosion-proof grade: ExdⅡCT6
